iscsicli Examples

The original Link is here.

Users\john>sc config msiscsi start= auto

The output was:

[SC] ChangeServiceConfig SUCCESS

Then I entered:

Users\john>net start msiscsi

The output was:

The Microsoft iSCSI Initiator Service service is starting.
The Microsoft iSCSI Initiator Service service was started successfully. 

Then, you use the Iscsicli command-line interface to connect to an iSCSI Target and list the available targets. The command I entered was:

Users\john>iscsicli QAddTargetPortal 192.168.1.31

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000
The operation completed successfully.

Next I entered:

Users\john>iscsicli ListTargets

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000 
Targets List:
quorum
data
The operation completed successfully.

You can then connect to a target using the following code as an example:

Users\john>iscsicli qlogintarget data

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000
Session Id is 0xfffffa800626e018-0x4000013700000006
Connection Id is 0xfffffa800626e018-0x5
The operation completed successfully.

The following code checked to make sure the operation was successful:

Users\john>iscsicli reporttargetmappings

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000 
Total of 1 mappings returned
Session Id : fffffa800626e018-4000013700000006
Target Name : data
Initiator : Root\ISCSIPRT\0000_0
Initiator Scsi Device : \\.\Scsi4:
Initiator Bus : 0
Initiator Target Id : 0
Target Lun: 0x0 <--> OS Lun: 0x0 
The operation completed successfully. 

You log out by using the logouttarget switch with the session ID, as the following sample code shows:

Users\john>iscsicli logouttarget fffffa800626e018-4000013700000006

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000 
The operation completed successfully.

To confirm the operation was successful, I entered the following code:

Users\john>iscsicli reporttargetmappings

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000 
No Mappings
The operation completed successfully.

The mappings obtained through the qlogintarget command aren’t persistent and will be lost at reboot. If you want a persistent connection, use the perssitenlogintarget switch, as the following code shows:

Users\john>iscsicli persistentlogintarget 
              data T * * * * * * * * * * * * * * * 0

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000 
The operation completed successfully.

To confirm that the operation was successful, I entered:

Users\john>iscsicli listpersistenttargets

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000 
Total of 1 peristent targets
Target Name : data
Address and Socket : 192.168.1.31 3260
Session Type : Data
Initiator Name : Root\ISCSIPRT\0000_0
Port Number :
++Security Flags : 0x0
++Version : 0
++Information Specified: 0x20
++Login Flags : 0x8
++Username : 
The operation completed successfully.

Entering T * * * * * * * * * * * * * * * 0 specifies all the required switches. To remove a persistent target, apply the information obtained from the listpersistentargets command, using the following code as an example:

Users\john>iscsicli removepersistenttarget Root\ISCSIPRT\0000_0 
               data * 192.168.1.31 3260

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000 
The operation completed successfully. 

To confirm the success of the operation, I entered:

Users\john>iscsicli listpersistenttargets

The output was:

Microsoft iSCSI Initiator Version 6.0 Build 6000
Total of 0 peristent targets
The operation completed successfully. 

You'll notice that I passed the initiator name first, then the target name, the port number (which is *), and last of all the iSCSI target server IP address and socket.